I handle facilities and purchasing for a 210-person company across three offices. Six years, roughly 70 orders a year, eight regular vendors. Here is the short version before I explain any of it:
Three specs decide whether a piece of gear actually works: the fabric's weight in grams per square meter, whether it breathes when the wearer is sweating rather than standing still, and whether your staff will follow the care instructions. Everything else on the vendor sheet — the "thermal rating," the "advanced wind-block technology" copy, the color swatches — is decoration.
That's it. That's the whole list. The rest of this is why I landed there, and where I got it wrong first.
What six years of buying taught me
When I took over purchasing in 2019, I did what most people do: I built a spreadsheet, put three quotes side by side, and picked the middle one. That worked fine for office chairs. It worked badly for insulated workwear, which is a category where the sticker price and the actual cost of ownership can drift apart by a factor of two.
In 2021 I bought 180 softshell jackets from a vendor I'd never used before. They came in at $61 a unit, about $19 under our previous supplier. The fabric felt fine in the sample. Three months later, roughly forty of them were coming back with delaminated seam tape after regular machine washing, and another batch had pilling on the cuffs that made them look three years old.
We replaced the worst of them out of the department budget. Between the replacements, the labor of collecting and sorting returns, and the fact that half the field team had stopped wearing the jackets entirely in cold weather, that "$19 savings" cost us somewhere north of $3,000 in real money and a lot more in credibility with the operations lead.
So I stopped shopping on price per unit and started shopping on what the fabric actually is. Which turns out to be harder than it sounds, because the labeling is a mess.
Reading the numbers that matter
Polartec 200 series fleece: the number is weight, not warmth
This one tripped me up for a while. When a supplier quotes "Polartec 200 series fleece," the 200 is not a warmth rating, a performance tier, or a model number. It's the fabric's weight — 200 grams per square meter. The Classic line runs 100, 200, and 300, and those figures map directly onto grams per square meter.
Why does that matter for a buyer? Because it tells you what the garment is for. A 100-weight fleece is a liner or a shoulder-season layer. A 200 is the workhorse — warm enough for a real winter commute, light enough that people will actually keep it in a locker rather than leave it at home. A 300 is a serious insulating layer that most office and light-field staff will overheat in the moment they step indoors.
We standardize on 200-weight for company jackets now. Not because it's the "best" — because it's the one that gets worn. A jacket nobody wears is a 100% waste of budget regardless of what it cost.
It's tempting to think a higher number means a better product. It doesn't. It means a heavier one, and heavier has consequences for both comfort and how often the thing comes back for repair.
Polartec Neoshell breathability rating: the number needs a reference point
Neoshell is a different animal — it's an air-permeable waterproof membrane, and its whole pitch is that it breathes better than a conventional waterproof shell. Buyers, naturally, want a number. Vendors, naturally, are happy to give one.
The problem is that "breathability" gets reported two ways, and they aren't interchangeable. MVTR (moisture vapor transmission rate) goes up as performance improves. RET (resistance to evaporative transfer) goes down. A vendor can quote a big MVTR figure that sounds impressive without ever telling you the test conditions, or quote an RET figure from a method you can't compare to anyone else's.
As of early 2025, Polartec's public materials place Neoshell in the range where genuinely breathable membranes live — the low single digits on the RET scale, where lower is better and anything under roughly 6 counts as breathable in real use. Verify that with your vendor before you quote it in a spec document, because these figures get revised and the test method matters more than the number.
Here's what most people don't realize: an RET number measured in a lab at a controlled humidity tells you almost nothing about whether a warehouse worker moving pallets in 2°C rain will stay comfortable. That person's real problem is sweat generation, not ambient moisture. Which is why for active roles we buy air-permeable shells and for stationary roles we don't bother — a cheaper conventional shell performs the same when nobody's moving.
The labels that confuse everyone
We also buy a lot of non-technical textiles: towels and robes for the overnight rooms, bedding for the on-call suite. That's where the confusing labels live.
Terry rayon fabric
"Terry" is the weave — those little uncut loops that give a towel its absorbency. "Rayon" is the fiber. Put together, terry rayon fabric is a looped-knit cloth made from a regenerated cellulose fiber, and it absorbs well and drapes nicely. It also tends to shrink and lose strength when wet, which is why I now check washing instructions before ordering anything for a shared facility. Staff will wash these on hot and dry them on high. Every time.
Is viscose a synthetic fabric?
Short answer: no, not in the way most people mean it. Viscose is a regenerated cellulose fiber — the raw material is wood pulp, usually from eucalyptus, beech, or pine. It's chemically processed into fiber form, but it's not petroleum-derived the way polyester or nylon is.
The confusion is understandable. It behaves like a synthetic in some ways (it's uniform, it's cheap, it's easy to dye) and like a natural fiber in others (it breathes, it wrinkles, it shrinks). For purchasing purposes the practical classification is: if it says viscose or rayon, treat it like a delicate natural fiber and budget for the care instructions. Rayon and viscose are essentially the same thing — the US trade term is rayon, the European term is viscose.
Microfiber sheet
Microfiber sheets are usually polyester or a polyester-nylon blend, woven from fibers finer than a human hair. They're cheap, they're durable, and they hold up to institutional laundry. What they aren't is breathable the way cotton is, and for a guest bed that's fine; for a sleeping surface someone uses eight hours a night, a hot sleeper will complain. I learned that one from a facilities ticket submitted at 2 a.m.
The takeaway isn't "avoid microfiber." It's that the label tells you the fiber, not the experience. Match the fiber to the actual use case and the complaints drop.
Where this advice stops working
To be fair, none of this matters if you're buying one jacket for one person. The cost of doing this analysis is real, and if you're ordering twelve units a year, buy from a supplier you trust and move on.
It also breaks down for highly specialized use. If your team is doing technical alpine work or anything with a genuine safety requirement, you don't want a generalist buyer doing fabric analysis — you want a spec written by someone who's accountable for the outcome, and you want to buy to that spec.
Granted, weight in grams per square meter doesn't capture everything either. Construction, seam treatment, and finish matter a lot, and I can't assess any of those from a data sheet. That's what the sample order is for. I just want to know what I'm looking at before I ask for one.
If you take one thing from this: the spec sheet isn't a ranking, and the sticker price isn't a total. The cheapest option I've ever bought cost us three grand in the first year. The second-cheapest got worn every day for five winters.